Subaru S209 2019 Service Manual page 126

FRONT SUSPENSION
5) Remove the rear bracket.
6) Remove the front bracket, and remove the flexible draw stiffener - front and the front/rear brackets as a
unit.
B: INSTALLATION
CAUTION:
Be careful not to damage the boot of the link ball.
1) Install the front bracket.
Tightening torque:
60 N·m (6.1 kgf-m, 44.3 ft-lb)
2) Install the rear bracket.
NOTE:
If the bolt mounting hole positions are not aligned, adjust the overall length of the flexible draw stiffener - front.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
3) Install the front support.
Front Flexible Draw Stiffener
FS-32
AA-13014
AA-13015