Subaru S209 2019 Service Manual page 108

Wheel Alignment
FRONT SUSPENSION
1) Loosen the self-locking nut after holding the bolt head section of lateral link assembly - front.
RS-00536
2) Turn the adjusting bolt until toe-in is within the specification.
NOTE:
When the left and right wheels are adjusted for toe-in at the same time, the movement of one scale gradua-
tion changes toe-in by approx. 6.0 mm (0.24 in).
To increase toe-in.
Rotate the left side clockwise. Rotate the right side counterclockwise.
FS-00018 FS-00019
To decrease toe-in.
Rotate the left side counterclockwise. Rotate the right side clockwise.
FS-00019 FS-00018
3) Attach and tighten a new self-locking nut.
Tightening torque:
100 N·m (10.2 kgf-m, 73.8 ft-lb)
FS-14