Subaru S209 2019 Service Manual page 88

CONTROL SYSTEMS
Tightening torque:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
(A) Rod
E: INSPECTION
1) Check the parts (bushing, cushion rubber, spacer, boot, stay and rod, etc.) for deformation, damage and
wear. If necessary, correct or replace faulty parts. Compare the removed parts with new parts to judge if there
are damages or not.
(A) Bushing
(B) Cushion rubber
2) Check the swing torque of rod linked with the gear shift lever.
If the torque exceeds the specifications, replace the bushing or retighten nuts.
MT Gear Shift Lever
(B)
(B) Boss
(C)
(A)
(A) (C)
(C) Spacer
CS-12
(A)
CS-01802
(D)
(B)
AA-12001
(D) Gear shift lever ASSY