Subaru S209 2019 Service Manual page 63

3) Adhere the I/C SPRAY SW LABEL with its aligning position (a) fitted to the aligning position (b) on the in-
tercooler water spray switch.
4) Press-fit the I/C SPRAY SW LABEL using a squeegee over a mounting paper.
Preparation tool:
Squeegee
5) Peel off the mounting paper of I/C SPRAY SW LABEL, and press-fit the I/C SPRAY SW LABEL again with
your fingers.
NOTE:
The part with sharp angle (a) of the I/C SPRAY SW LABEL comes off easily, so press it firmly.
6) Install the intercooler water spray switch.
7) Align the center position of the roll connector.
8) Install the steering wheel.
Tightening torque:
Steering wheel: 39 N·m (4 kgf-m, 28.8 ft-lb)
Clearance:
Between cover assembly - column and steering wheel: 4 — 6 mm (0.16 — 0.24 in)
Intercooler Water Spray Switch
IN-33
(a)
(b)
(a)
(a)
INTAKE (INDUCTION)
AA-14038
AA-14039