Turbocharger - Subaru S209 2019 Service Manual

7. Turbocharger

A: REMOVAL
1) Disconnect the ground terminal from battery.
2) Drain approximately 3.0 L (3.2 US qt, 2.6 Imp qt)
of coolant.
3) Lower the vehicle.
4) Remove the intercooler.
5) Remove the intercooler stay RH No. 2.
6) Remove the center exhaust pipe.
7) Lower the vehicle.
8) Disconnect the engine coolant hose from the
water pipe.
9) Remove the oil inlet pipe from the turbocharger.
Turbocharger
CAUTION:
In order to prevent damaging the oil pipe on the
cylinder head side, fix the section (a) shown in
the figure when loosing the oil inlet pipe flare
nut, and avoid the part from rotating together
while loosening the nut.
EX-00007
10) Disconnect the engine coolant hose from the
water pipe, and remove the water pipe from the tur-
bocharger.
AA-15012
11) Remove the joint pipe from the turbocharger.
IN-13
INTAKE (INDUCTION)
(a)
IN-02955
AA-15010
AA-15009
AA-15002