Subaru S209 2019 Service Manual page 216

EXTERIOR/INTERIOR TRIM
(1) Attach the pattern paper (a) so that it fits the fender arch shape mating surface (b).
(2) Using a straight pick (c) or similar, make mark-off lines for drilling holes (b) at 2 locations according to
the pattern paper (a).
(c)
(3) Prepare a stopper by wrapping a cloth adhesive tape, etc. around the drill bit at the position 5 mm (0.2
in) from the tip end.
Rear Bumper
(b)
(b)
(a)
(b)
EI-28
(a)
AA-10123
AA-10124