Subaru S209 2019 Service Manual page 244

EXTERIOR/INTERIOR TRIM
(3) Attach the S209 emblem (a) while aligning it to the position shown as dotted line (b).
(b)
(4) Press-fit the S209 emblem.
3. REAR QUARTER GARNISH
1) Perform the work for installing the rear quarter garnish.
NOTE:
When using a new rear quarter outer, perform the following procedures.
(1) Disconnect the ground terminal from battery.
(2) Remove the rear tires.
(3) Remove the bumper face - rear.
(4) Remove the mud guard - rear.
(5) Remove the spoiler assembly - side.
(6) Print out and cut the pattern papers named as "RQ GARN, Patern paper LH".
CAUTION:
Confirm that the pattern paper is printed out with accurate size.
(7) Press the pattern papers (a) and (b) against the rear quarter outer, and attach masking tapes (c).
Side Garnish & Side Spoiler
EI-56
(b)
(a)
AA-10080