Subaru S209 2019 Service Manual page 86

CONTROL SYSTEMS
11) Install the boot and insulator assembly, and secure with a clamp.
12) Install the panel center LWR LH and RH.
13) Install the cover - shift lever.
14) Install the console box assembly.
15) Install the gear shift knob by rotating it clockwise from 14 to 18 turns so that the distance (A) from the gear
shift knob end surface to the slider end surface becomes 10 mm (0.394 in) or more.
CAUTION:
Do not turn the gear shift knob excessively to prevent it from being damaged.
16) Make sure the gears can be shifted accurately into each gear.
17) Connect the battery ground terminal.
C: DISASSEMBLY
1) Remove the boss from the rod.
(A) Rod
MT Gear Shift Lever
(B)
(B) Boss
CS-10
A
(A)
CS-01924
CS-01802