License Plate Light - Subaru Legacy 2001 Manual

n Back-up and brake/tail light bulbs
1. Unlatch the rear combination light cover by moving the knob up-
ward. Open the cover up.
2. Remove the bulb socket from the rear combination light assembly
by turning it counterclockwise.
3. Remove the bulb from the socket by pushing it and turning coun-
terclockwise. Install a new bulb in the socket.
4. Set the bulb holder into the rear combination light assembly and
turn it clockwise until it locks.
5. Close the cover and latch the lock.
J License plate light
1. Remove the mounting screws using a phillips screwdriver.
11-58
HBB026BC
HBF013EA
HBB025BA
HBB027BA