General Description - Subaru S209 2019 Service Manual

FRONT SUSPENSION

1. General Description

A: SPECIFICATION
1. FRONT ALIGNMENT (INSPECTION VALUE)
Tire size
Wheel arch height
+12 mm
(Tolerance: (
–24 mm
Camber (tolerance: 0°30 Differences between RH and LH: 35 or
less)
Caster (referential value)
Steering angle (tolerance: 1.5°)
Toe-in
Kingpin angle (referential value)
2. REAR ALIGNMENT (INSPECTION VALUE)
Tire size
Wheel arch height
+12 mm
(Tolerance: (
–24 mm
Camber (tolerance: 0°45 Differences between RH and LH: 45 or
less)
Toe-in
Thrust angle (tolerance: 0°0030)
NOTE:
• Adjust with the value less than the inspection value, taking aging variation into consideration.
• Front toe-in, rear toe-in and front camber can be adjusted. Adjust if the value of toe-in or camber exceeds
the tolerance range of the specification chart.
• Other items except for front toe-in, rear toe-in and front camber that are described in the specification chart
cannot be adjusted.
• If other items exceed the tolerance range of the specification chart, check the suspension parts and con-
nections for deformation. If defective, replace with new parts.
A – B = Positive: Toe-in, Negative: Toe-out
General Description
+0.47 in
))
–0.94 in
+0.47 in
))
–0.94 in
B
A
mm (in)
Inner wheel
Outer wheel
OUT 23 (OUT 0.080.12) Toe angle (sum of both
mm (in)
mm (in)
mm (in)
Toe angle (sum of both wheels): 0°16
B
FS-2
265/35R19
359 (14.13)
–1°05
6°38
32.0°
28.6°
wheels): OUT 0°100°16
15°37
265/35R19
351 (13.82)
–1°50
03 (00.12)
0°00
A
FS-00657