Subaru S209 2019 Service Manual page 105

Thrust angle: Inspection value
 
0° 30

Less than 30 when "L" is 23 mm (0.9 in) or less
(a) Center line of loci (front axle)
B: ADJUSTMENT
CAUTION:
When the wheel alignment has been adjusted, perform the following adjustment.
1. FRONT CAMBER
1) Adjust the camber angle to the following value.
Tire size
265/35R19
2) Loosen the two flange nuts while holding the strut bolts.
3) Turn the camber adjusting bolt so that the camber is set at specification.
Wheel Alignment
(b)
(a)
(b) Center line of loci (rear axle)
Camber (difference between RH and LH 35 or less)
–1°050°30
FS-11
FRONT SUSPENSION
L
FS-00658