EXTERIOR/INTERIOR TRIM
(3) Peel off 38.5 mm (1.52 in) of the backing sheet (b) on the rear quarter garnish.
(b)
(4) Temporarily install the rear quarter garnish while aligning its line to the line (a) of the rear quarter out-
er.
(5) Peel off the backing sheet, and press-fit to the rear quarter outer.
(6) Remove the masking tape of the bolt tip temporarily attached in step (1).
(7) Apply LOCTITE 263 or equivalent to the threads of the hexagon cap nut (b).
(8) Install the washer (a) and the hexagon cap nut (b) from the arch rear inner side.
Side Garnish & Side Spoiler
(b)
(b)
(b)
(a)
EI-60
(b)
(b)
(a)
(b)
AA-10055
AA-10057