Rear Spoiler - Subaru S209 2019 Service Manual

EXTERIOR/INTERIOR TRIM

6. Rear Spoiler

A: REMOVAL
1) Remove the trim panel - trunk lid.
2) Remove the nuts (a) and (b), and then remove the rear spoiler assembly.
CAUTION:
• When removing the nut, be careful not to drop the nut inside the trunk lid panel.
• When removing the nut, be careful not to allow the rear spoiler to fall off.
• Be careful not to damage the vehicle body during removal and installation.
• Be careful that the reactive force of trunk lid increases when the rear spoiler is removed.
(a) Nut (large flange)
B: INSTALLATION
1) Clean the installation surfaces of the trunk lid and the spoiler.
CAUTION:
Make sure that there is a gasket attached on the clip of the spoiler assembly or garnish assembly. If
a gasket is not attached, water leakage may occur.
Rear Spoiler
(a)
(b)
(b) Nut (small flange)
EI-64
AA-10079