Subaru S209 2019 Service Manual page 148

REAR SUSPENSION
Tightening torque:
T1: 38 N·m (3.9 kgf-m, 28 ft-lb)
T2: 80 N·m (8.2 kgf-m, 59 ft-lb)
T3: 90 N·m (9.2 kgf-m, 66.4 ft-lb)
(5) Install the sensor assembly - headlight beam leveler.
CAUTION:
Do not apply impact to the sensor assembly - headlight beam leveler or forcibly move the arm. Doing
so may cause sensor damage and malfunction.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
2) Install the clips, and install the trim panel - trunk side.
3) Install the mat - trunk, and return the rear seat backrest to the lock position.
4) Install the rear wheels and lower the vehicle.
Tightening torque:
120 N·m (12.2 kgf-m, 88.5 ft-lb)
5) Inspect the wheel alignment and adjust if necessary.
Rear Shock Absorber
T3
T2
RS-20
T1
T2
AA-13029
RS-00409