Subaru S209 2019 Service Manual page 234

EXTERIOR/INTERIOR TRIM
• Remove any burrs on the spoiler assembly - side to avoid damaging the vehicle, and clean the part.
(a)
(6) Make a pilot hole of 3 mm (0.12 in) diameter at the mark-off line position (b) using a drill (a), and then
make a hole of 6 mm (0.24 in) diameter.
CAUTION:
Be sure to make a hole of a specified diameter. The side under spoiler may not be installed if the hole
diameter is large.
Side Garnish & Side Spoiler
(b)
Ft
(a) (b)
(a)
(b)
EI-46
Ft
AA-10029
Ft
(a)
AA-10030