INTAKE (INDUCTION)
12) Disconnect the air control hose (a), and loosen
the clamp holding the intake duct to the turbocharg-
er.
(a)
13) Disconnect the oil outlet pipe from the oil outlet
hose, and remove the turbocharger.
14) Remove the turbocharger stay.
(A)
(A)
(A) To cylinder head RH
(B) To cylinder block RH
Turbocharger
AA-15001
AA-15014
(B)
IN-02859
B: INSTALLATION
1) Install the turbocharger stay.
Tightening torque:
T1: 33 N·m (3.4 kgf-m, 24.3 ft-lb)
T2: 42.5 N·m (4.3 kgf-m, 31.3 ft-lb)
T1
(A)
(A) To cylinder head RH
(B) To cylinder block RH
2) Make the marking (b) at a position of 25 mm (1.0
in) (a) from the lower end of oil outlet pipe.
(a)
3) Set the turbo charger, and connect the oil outlet
pipe to the oil outlet hose.
CAUTION:
Insert the oil outlet hose to the marking posi-
tion of the oil outlet pipe.
IN-14
T2
(B)
(A)
IN-02860
(b)
AA-15020