Subaru S209 2019 Service Manual page 178

POWER ASSISTED SYSTEM (POWER STEERING)
NOTE:
When installing a new suction hose, perform the following steps 2) through 4).
1) Temporarily tighten the hose bracket bolt.
(1) Hose ASSY
(2) Hose bracket
2) Install a new clip band (a) to the pressure hose (d) and suction hose (c).
CAUTION:
Align the installation position of the clip band (a) with the protector edge (e) of the suction hose (c).
(a) Clip band
(b) Protector
(c) Suction hose
(d) Pressure hose
(e) Protector edge
3) Wrap the protective cover to the area (b) shown in the figure so that it covers the area between the suction
hose protectors (a).
Pipe Assembly
(2)
(1)
PS-00624
(d)
(c)
(a) (e)
PS-8
(b)
AA-13050