Subaru S209 2019 Service Manual page 145

Tightening torque:
T1: 38 N·m (3.9 kgf-m, 28 ft-lb)
T2: 80 N·m (8.2 kgf-m, 59 ft-lb)
T3: 90 N·m (9.2 kgf-m, 66.4 ft-lb)
3) Install the sensor assembly - headlight beam leveler.
CAUTION:
Do not apply impact to the sensor assembly - headlight beam leveler or forcibly move the arm. Doing
so may cause sensor damage and malfunction.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
4) Install the rear wheels and lower the vehicle.
Tightening torque:
120 N·m (12.2 kgf-m, 88.5 ft-lb)
5) Connect the battery ground terminal.
6) Inspect the wheel alignment and adjust if necessary.
CAUTION:
When the wheel alignment has been adjusted, perform adjustment of the VDC sensor midpoint set-
ting mode.
7) Perform reinitialization of the auto headlight beam leveler system.
Rear Lateral Link
T3
T2
RS-17
T1
REAR SUSPENSION
T2
AA-13029