Subaru S209 2019 Service Manual page 165

General Description
BRAKE
• When performing a repair, identify the cause of trouble and avoid unnecessary removal, disassembly and
replacement.
• Some vehicle components are extremely hot immediately after driving. Be wary of receiving burns from
heated parts.
• Use SUBARU genuine grease, the recommended or equivalent. Do not mix grease etc. of different grades
or manufacturers.
• Be sure to tighten fasteners including bolts and nuts to the specified torque.
• Always use the jack-up point when the shop jacks or rigid racks are used to support the vehicle.
• Apply grease onto sliding or revolving surfaces before installation.
• Be sure that the surface of brake disc, brake pad or brake shoe is free from grease or oil.
• Remove contamination including dirt and corrosion before removal, installation, disassembly or assembly.
D: PREPARATION TOOL
1. GENERAL TOOL
TOOL NAME REMARKS
Disc brake piston tool Used for pushing back the piston.
BR-5