Table of Contents
Advertisement
(3) Remove the clip (a), then remove the mud guard - rear.
B: INSTALLATION
1. MUD GUARD - REAR
NOTE:
• When using a new reinforce wheel apron, perform the work described in step 1).
• Left and right reinforce wheel aprons differ in shape. However, procedures for the right side can be per-
formed in the same way as for the left side.
1) Perform the work for installing the mud guard - rear.
(1) Disconnect the ground terminal from battery.
(2) Remove the bumper face - rear.
(3) Remove the muffler.
(4) Remove the mud guard - rear.
(5) Cover the area around the reinforce wheel apron with blanket, etc.
CAUTION:
Use a blanket to protect the suspension, brake and the peripheral parts.
(6) Print out and cut the pattern papers named as "REINF WHEL APPON PATTERN".
CAUTION:
Confirm that the pattern paper is printed out with accurate size.
(7) Press the pattern paper (a) against the reinforce wheel apron, and attach masking tapes (b).
Mud Guard
(a)
EI-9
EXTERIOR/INTERIOR TRIM
(a)
AA-10089
Advertisement
Chapters
Table of Contents
