8) Remove the clamp of the sub rear harness.
9) Remove the sensor assembly - headlight beam leveler.
10) Remove the fuel tank protector.
11) Remove the rear sub frame assembly.
(1) Remove the bolts and nuts from the lower side of rear shock absorber assembly.
(2) Support the rear sub frame assembly using a transmission jack.
CAUTION:
The rear sub frame assembly is heavy. Make sure that it is horizontally-supported.
(3) Remove the bolts, and remove the left and right supports - sub frame, rear sub frame stopper lower,
and the rear support sub frame.
(4) Remove the rear sub frame assembly.
Rear Sub Frame
RS-9
REAR SUSPENSION
RS-00484
RS-00352