Subaru S209 2019 Service Manual page 263

(6) Cut the EPT sealer (5.0t) to 70 mm × 50 mm (2.756 in × 1.969 in) (a) and to 70 mm × 30 mm (2.756
in × 1.181 in) (b).
(a)
(a) 70 mm × 50 mm (2.756 in × 1.969 in)
(b) 70 mm × 30 mm (2.756 in × 1.181 in)
(7) Attach the EPT sealers (a) and (b) created in the step (6) to the cut sections of the trim panel - trunk
side.
NOTE:
Margin (A) for the EPT sealer is 3 mm (0.118 mm).
(A)
(a)
Ft
(A) 3 mm (0.118 in)
(a) 70 mm × 50 mm (2.756 in × 1.969 in)
(b) 70 mm × 30 mm (2.756 in × 1.181 in)
2) Install the trim panel - trunk side.
3) Install the trim panel - trunk rear.
4) Install the mat - trunk.
5) Return the rear seat backrest to the lock position.
6) Install the trim panel - trunk lid.
Trunk Room Trim
(b)
AA-13039
(b)
AA-13040
EI-75
EXTERIOR/INTERIOR TRIM