Subaru S209 2019 Service Manual page 140

REAR SUSPENSION
(4) Temporarily tighten the bolts on the rear sub frame side of the rear support sub frame.
(5) Tighten the bolts on the body side.
Tightening torque:
70 N·m (7.1 kgf-m, 51.6 ft-lb)
(6) Tighten the bolts on the rear sub frame side.
Tightening torque:
145 N·m (14.8 kgf-m, 106.9 ft-lb)
4) Install the bolts and nuts on the lower side of rear shock absorber assembly.
Tightening torque:
90 N·m (9.2 kgf-m, 66.4 ft-lb)
5) Install the fuel tank protector.
6) Install the sensor assembly - headlight beam leveler.
CAUTION:
Do not apply impact to the sensor assembly - headlight beam leveler or forcibly move the arm. Doing
so may cause sensor damage and malfunction.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
7) Install the clamp of the sub rear harness.
8) Install the cable assembly - parking brake.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
9) Install the brake hose bracket and the disc brake assembly - rear.
Tightening torque:
Brake hose bracket: 33 N·m (3.4 kgf-m, 24.3 ft-lb)
Disc brake assembly - rear: 73 N·m (7.4 kgf-m, 53.8 ft-lb)
10) Install the rear ABS wheel speed sensor.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
11) Install the propeller shaft assembly.
12) Install the rear exhaust pipe.
13) Install the rear wheels and lower the vehicle.
Tightening torque:
120 N·m (12.2 kgf-m, 88.5 ft-lb)
Rear Sub Frame
RS-12
AA-13023