EXTERIOR/INTERIOR TRIM
(1) Remove screws (b) of the rear quarter spoiler (a).
(2) Remove the double-sided tape, and remove the rear quarter spoiler.
NOTE:
If the double-sided tape is difficult to remove, warm it with a hairdryer, etc. to make the removal easier.
B: INSTALLATION
NOTE:
• When installing a new bumper face - rear, perform the following steps.
• Perform the procedures for the right side in the same way as for the left side.
1) Perform the work for installing the muffler.
(1) Print out and cut the pattern papers named as "Pattern for rear bumper out".
CAUTION:
Confirm that the pattern paper is printed out with accurate size.
(2) Attach the pattern papers (a) and (b) to the bumper face - rear.
(a)
Pattern paper LH OUT
Rear Bumper
(b)
(c)
(c)
(c)
(a)
(c)
(b)
Pattern paper LH IN
EI-26
UP
RH
Ft
(a)
(c)
(c)
(b)
(c)
Masking tape
Rr
AA-10072
AA-10153