ELECÏRICAL.BODY AND CHASSIS A.61
Fig. 8C-27-lnsùum€nt Pansl 8êz€l-lvlâlibu
FUEL GAGE
Replec€m€nt
,
l. Remove instrument bezel as d€scribed previously in
this section.
2. Remove retaining screws and remove fuel gage,
3. Install replacement fuel gage in reve$e order of
CLOCK
R€plâcemont (Fig. 8C-28)
l Remove iistrument bezel âs described previously in
this section.
2. Remove retaining suews and rcfirove clock.
3. Install replâcment clock in revelse order of
INSTRUMENl CLUSlËR
R6plac€m€nt (Fig. 8C-29)
l. Remove instrument bezel as d€€cribed pr€viously in
this s€ction.
2, Remove 2 screws at transmission selector indicator
and calefully lower indicâtor assembly to a position *here
cable can be disconnected.
3. Rerhove 3 screws at windshield wiper/light switch
mounling plate afld pull assembly rcarward to provide
access to lower left cluster attaching bolt ând nùt. Remove
ftfiaining nuts attaching clusier to I.P.
4. Pull cluster rearward and disconnect âll wirinr and
câbl€s.
5. Remove cluster.
6. If new clùster is to be installed, transfer gag€s ând
instrurnents to new cluster,
7, Instâll replacement instrument cluster in revers€
order of removal. Adjust Cable as reqùired.