Chevrolet CAMARO 1979 Service Manual page 548

6 8 . 1 6 E N G I N E C O O L I N G
, 7 5 R E F ,
I I 4 O U N T I N G P A N E L
SHROUD
NUT
NUT
C L I P
EADIATOR SUPT.
L-6 &
H.D. COOLING
TYPICAL
(4) PLACES
F i g . 6 a - 1 4 - F a n S h r o u d - ' F ' B o d y
4. Install air scoop.
.5. Conn€ct battery
negative cable.
Romoval ('A"F'and'X'Body/Cod€ M, A, U and
L Enginôs) (Fig. 68-17)
L Disconnect battery negative cable at baltery.
2. Remoye upper shroud to radiator support attâching
3. Remove upper shrcud to lower shroud atlaching
staples. Remove upper shroùd.
4. Remove lower shroud to radiâtor support attaching
screws- Remove lower shroud.
Installation ('A'
'F' and 'X' Body/Code M, A, U
ând L Engines)
l lnstatt lower shroud and mount to radiator support
with âttâching screws. Torque to 50 lb. in. (6 N'm).
2. Instâll upper shrcud and mount to radÉtor suppo
with attaching screws. Torque to 50 lb. in. (6 N'm).
3. Align upper and lower shroud mâting surfaces. Drill
two hotes on either side, where staples were removed.
4. Install bolts, nuts and wâsh€rs to âttach lower and
upper shroud together.
5. Connect battery negative câble.
U P P E B [ , l O U N T I N G P A N E L
SH ROUD
IJPPE R
A / C O R H . D . C O O L I N G
STAPLE
WITH A/C
O B H . D . C O O L I N G
STAPLE
LOWER
I \ l O U N T I N G P A N E L
-=
R A D I A T O F S U
F i g . 0 B - 1 5 - F â n S h r o u d ' X " B o d y