Self-Test And Diagnostics - Nortel Meridian SL-100 Reference Manual

Table 2-3xxx
Example of adding the ATA line class code for system configuration in
SERVORD
(continued)
Prompt
Ringtype, Group,
Subgroup, NCOS,
SNPA Key, Ringing
LEN_OR_LTID
OPTKEY

Self-test and diagnostics

A red LED light is located on the back wall of the footstand. If indicates the
status of the ATA.
Flashing red indicates that the ATA is operating normally. For further
troubleshooting advice, check the manufacturers documentation that
accompanied the analog device.
Solid red indicates that the ATA is not operating normally. Contact the
System Administrator.
Red light off indicates that there is no power going to the ATA or the unit
is not operating properly. Check the power connections the the ATA. If
problems continue contact the System Administrator.
Meridian SuperNode MSL-100 Meridian Modular Telephones Reference Manual MSL11
Response
Follow normal
administration
procedures for an
M2006 class
telephone for these
prompts.
A B C D
$
Installation procedures 2-17
Description
the prompts require datafill
specified by your customer
site
A = IPE/DLM column
B = IPE/DLM shelf
C = IPE/DLM card slot
D = IPE/DLM odd port
No options are available for
the ATA.