Oki IP-6620 Maintenance Manual page 327

<Adjustment values for mechanical and print head adjustments>
- Correcting the cap position:
- CAPPING-UNIT-CV Cam Position Adjustment:
- Adjusting the wiping position:
- Nozzle position adjustment:
- Head position adjustment (main scan direction): See the User's Guide.
- Bidirectional adjustment:
- Media advance adjustment:
- Sensor adjustment (top):
- Sensor adjustment (side):
- Print head R/L adjustment:
(f) Perform the following in the SYSTEM menu in the maintenance mode on the operation
panel.
- SAVE DEFAULT SET.: Saves EEPROM data in the factory default setting area of the
flash
- SAVE PRINTER SET.: Saves EEPROM data in the backup area of the flash memory.
(g) Restart the printer.
Notes
 When replacing the IPB5 board, turn off the power without executing fill cap. Note that the fill
cap status in the new IPB5 board is set as not being performed yet.
 After replacing the IPB5 board, update the firmware to the latest version.
5-168
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
memory.
OKI Data Infotech Corporation CONFIDENTIAL
See section 7.4.
See section 7.5.
See the User's Guide.
See the User's Guide.
See the User's Guide.
See the User's Guide.
See the User's Guide.
See the User's Guide.