6.10.6 SWITCH(CAP)-ASSY and LEVER(CAP)-ASSY
<Removal>
1.
Move the carriage to the maintenance
area.
2.
Remove the CAPPING-UNIT-MW.
3.
Remove the screw securing the
LEVER(CAP)-HV-ASSY, remove the
SCREW(CAM-LOCK-HV), disconnect
the connector of the connected cable,
and then remove the
LEVER(CAP)-HV-ASSY (with the
MICRO SWITCH 4 inside).
Note
When installing the LEVER(CAP)-HV-ASSY
and the SCREW(CAM-LOCK-HV), place the
cap at the middle height. Avoid the highest
and the lowest position for the cap.
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
SCREW(CAM-LOCK-HV)
LEVER(CAP)-HV-ASSY
6-103