5.
With the Up and Down buttons, select
ADJUST FOR 1 COLOR, then press the
OK button.
6.
With the Up and Down buttons, select
the color of the print head to adjust, then
press the OK button.
Note
Only one print head can be adjusted at a time
during single color adjustment.
7.
Press the OK button.
8.
The carriage moves to the wiping
position for the selected print head and
stops with the third wiper blade turned
upward.
9.
Check the position of the wiper blade to
the nozzle guard.
How to check the position
- Check visually that the wiper blade extremity enters the groove on the nozzle guard, as shown in
the pictures below.
2.5 mm
Wiper blade extremity
3.0 mm
Nozzle guard groove
OKI Data Infotech Corporation CONFIDENTIAL
>> WIPER POS ADJUST
ADJUST FOR 1 COLOR
>>>ADJUST FOR 1 COLOR
CC
>>>ADJUST FOR 1 COLOR
Lc
>>>ADJUST FOR 1 COLOR
OK?
CHECK WIPING POSITION
OK?
Chapter 7 Adjustment
◎
◎
◎
◎
◎
7-23