Language Setting Mode; Post-Head Replacement Guidance Skip Mode; Poc Skip Mode (Not Available To Users) - Oki IP-6620 Maintenance Manual

3.5.1

Language setting mode

This mode is used when the user cannot understand the menus because the wrong language is
set.
When the printer enters this mode, the language on the LCD panel changes to English
automatically, and the menus to set the language, time zone, length unit, and temperature unit
are displayed.
Note
See 3.6.1 Starting the printer with setting the language for details.
3.5.2

Post-head replacement guidance skip mode

This menu is used to skip the print head replacement guidance when starting the printer.
After a print head has been replaced, normally the guidance after print head replacement is
displayed when the printer starts. This mode is used to skip this guidance.
After the printer has started in this skip mode once, it will not display the post-head replacement
guidance even if restarted later.
Note
See 3.6.3 Starting the printer after replacing the print head for details.
3.5.3

POC Skip Mode (Not available to users)

This mode functions in the same way as normal startup operation except that POC is skipped.
This mode is used to operate the printer forcibly when POC error has occurred. (However, this
does not ensure printer normal operation as an error has occurred.)
Actually the printer does not skip the POC processing, but always replies the POC error with
normal value.
Note
POC errors: System errors 1010 to 1e00
3-98
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations