6.15.7 TUR slide switch
One TUR slide switch is installed at both sides. The procedure below explains how to remove the
left TUR slide switch. The procedure to remove the right TUR slide switch is the same.
<Removal>
1.
Remove the
COVER(TU-DETECT)L-MW with two
securing screws.
* Remove the
COVER(TU-DETECT)R-MW for the
right side TUR slide switch.
2.
Disconnect the TUR slide switch
connector.
3.
Cut the AB tie (cable tie).
4.
Remove the TUR slide switch with two
securing screws.
6-136
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
COVER(TU-DETECT)L-MW
TUR slide switch
Connector
TUR slide switch
AB tie (cable tie)