INSTALL WIDER MEDIA
<Description>
Media of less than 762 mm (30 inches) was installed when automatic nozzle map was
performed.
<Action>
Check the Items to be Checked on the table below, and perform the actions starting from the top
until the problem is solved.
No
Firmware
1
Check that the media is 762 mm
2
(30 inches) or larger.
The detected width of the media
3
5-46
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
Items to be Checked
OKI Data Infotech Corporation CONFIDENTIAL
◎
Upgrade the firmware to the latest version.
Use media of 762 mm (30 inches) or larger.
- Reinstall the media.
- Check that there are no problems with the media width
detection.
Action