Oki IP-6620 Maintenance Manual page 79

(i) MEDIA HEATERS
>>>>MEDIA HEATERS
 YYYYYYYY
YYYYYYYY: Setting after change
Parameter
OFF Stopped
55-55-55 Each heater operates until it reaches the limit
temperature below.
- Afterheater: 55°C
- Printheater: 55°C
- Preheater: 55°C
45-40-45 Each heater operates until it reaches the following
temperature required to adjust the platen flatness.
- Afterheater: 45°C
- Printheater: 40°C
- Preheater: 45°C
(ii) PRINT HEAD HEATERS
>>>>PRINT HEAD HEATERS
 YYYY
YYYYYYYY: Setting after change
Parameter
OFF Stopped
30°C Heat each print head until they reach 30°C.
* The temperature is set uniformly so that this menu is used to check that the print head
heaters are operating.
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
◎
Description
◎
Description
Remark
Remark
3-39