Oki IP-6620 Maintenance Manual page 448

6.13.3 SUBTANK-ASSY(MW)
<Removal>
1.
Drain the ink (see Chapter 3).
When all the ink has been drained, turn
off the printer.
2.
Remove the
COVER(INKBOX-REAR)-MW (see
6.12.4).
3.
Remove the COVER(SUBTANK)-MW
(see 6.3.11).
4.
Remove the
NEEDLE-FIX-PLATE-FRONT-ASSY
(see 6.13.1).
5.
Remove the screw securing the
SUBTANK-ASSY(MW), and remove the
SUBTANK-ASSY(MW) by sliding it to the
arrow direction.
Note
Note that the SUBTANK-ASSY(MW) is stuck
at the position A shown in the second picture.
So before removing the
SUBTANK-ASSY(MW), at the position A,
slide the SUBTANK-ASSY(MW) slightly to the
arrow direction.
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
SUBTANK-ASSY(MW)
SUBTANK-ASSY(MW)
A
6-119