Oki IP-6620 Maintenance Manual page 358

4.
Remove the three clamps, the two cable
ties, and the four metal plates securing
the harness, and then remove the
CABLE(Board-Power)-ASSY(MW).
Pass through the tube holder.
5.
Remove the PCB-ASSY-HCB1M board
(see 6.8.4).
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
Three clamps
CABLE(ACT-HCB)1-ASSY(HV104) connection
Two cable ties
6-29