Oki IP-6620 Maintenance Manual page 83

(ii) CAP MOTOR
This menu is used to operate the cap motor.
>>>>CAP MOTOR
 YYYYYYYY
YYYYYYYY: Setting after change
Parameter
STOP Stop the cap motor
OPEN CAP Stop the cap motor and make it turn in the open direction
CLOSE CAP Stop the cap motor and make it turn in the closed direction
(iii) TUR MOTOR
This menu is used to operate the TUR unit motor.
>>>>TUR MOTOR
 YYYYYYYY
YYYYYYYY: Setting after change
Parameter
OFF Stop the TUR unit motor
ON Activate the TUR unit motor
(iv) INK SUPPLY MOTOR 1 to 7
This menu is used to operate the motors of the ink supply pumps 1 to 7.
>>>>INK SUPPLY MOTOR 1
 YYYYYYYY
YYYYYYYY: Setting after change
Parameter
STOP, PUMP CLOSED
STOP, PUMP OPEN
(CIS model only)
INK TO SUBTANK
INK TO CARTRIDGE
* The power is 80% for the LCIS model.
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
◎
Description
◎
Description
◎
Description
Close the ink supply pump and stop the motor
Open the ink supply pump and stop the motor
Run the ink supply pump motor in the normal
direction (the ink is sent to the subtanks).
Run the ink supply pump motor in the reverse
direction (the ink returns to the cartridges).
Remark
Power 35%
Power 35%
Remark
Power 100%
Power 100%*
Power 100%*
Power 100%*
Power 100%*
Remark
3-43