Oki IP-6620 Maintenance Manual page 391

6.8.3 PCB-ASSY-SNS1
<Removal>
1.
Open:
- COVER(FRONT)ASSY-MW,
- COVER(COVER-FU)-MW; and
- COVER(COVER-FB)-MW.
2.
Remove:
- One screw securing the
COVER-EDGESENSOR to the
BASEHEAD_LOWER; and
- COVER-EDGESENSOR.
3.
Disconnect the PCB-ASSY-SNS1
connector.
4.
Remove:
- One screw securing the
PCB-ASSY-SNS1 to the
BASEHEAD_LOWER; and
- PCB-ASSY-SNS1.
Note for installation
Install the PCB-ASSY-SNS1 so that it is
parallel to the BASEHEAD_LOWER.
6-62
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
Connector
PCB-ASSY-SNS1
COVER-EDGESENSOR
BASEHEAD_LOWER
BASEHEAD_LOWER