Oki IP-6620 Maintenance Manual page 497

7.5.2 Single color adjustment
<Preparation>
1.
Remove the cap cover (see 7.5.1
Wiping unit adjustment).
Open the COVER(CENTER)-F, remove
the COVER(R)ASSY-MW, and then
close the COVER(CENTER)-F.
2.
Remove the wiper cleaning bottle and
the wiper sponge.
Remove the BRACKET(WIPE)-GUARD.
Notes
 Do not spill the liquid inside the wiper
sponge.
 Be sure to insert the protrusion when
installing the BRACKET(WIPE)-GUARD.
<Procedure>
1.
Press the ADJUST button.
2.
With the Up and Down buttons, select
MECHANICAL ADJUST.
3.
Press the OK button.
4.
With the Up and Down buttons, select
WIPING POS ADJUST, then press the
OK button.
7-22
OKI Data Infotech Corporation CONFIDENTIAL
BRACKET(WIPE)-GUARD
Protrusion
ADJUST
 MEDIA ADVANCE
ADJUST
 MECHANICAL ADJUST
>MECHANICAL ADJUST
 PH POSITION ADJUST
>MECHANICAL ADJUST
 WIPING POS ADJUST
Chapter 7 Adjustment
Securing screw
◎
◎
◎
◎