Error
Cause
No.
4000
Firmware Internal Error
(Mechanical group)
5000
Firmware Internal Error (UI
group)
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
Service Engineer Inspection
(For inspection criteria, see
User Solution
Reference to Check/Replace
Restart the printer.
- Install the last firmware version.
- Check that the home position
sensor is correctly installed and
clean.
- Check that the home position
sensor connector is connected
correctly.
- Check that the CARRIAGE
FFC,MW connectors are
connected correctly to both the
HCB1M and the IPB5.
- Check that the ROBOT
CABLE,MW connectors are
connected correctly.
Restart the printer.
Install the last firmware version.
OKI Data Infotech Corporation CONFIDENTIAL
Assumed Replacement
Parts.)
- Firmware version
- Home position sensor
- Robot cable
- FFC
- PCB-ASSY-HCB1M
- PCB-ASSY-IPB5-100
- PCB-ASSY-IPB5-100
Firmware version
Reference to
Check/Replace
Part
Parts
5.5.60
5.5.60
5-77