15.
Close the drawer after installing the
STAY-BASE-UP.
16.
Turn the printer on.
17.
Perform the following adjustment after
the printer has started.
<Adjustment procedure>
(1) Press the ADJUST button.
(2) With the Up and Down buttons,
select RMNG INK SNSOR ADJ, then
press the OK button.
(3) With the Up and Down buttons,
select POST-REPLAC ADJ, then
press the OK button.
(4) Select the color of the remaining ink
sensor you have replaced, and press
the OK button.
OKI Data Infotech Corporation CONFIDENTIAL
ADJUST
MEDIA ADVANCE
>> RMNG INK SNSOR ADJ
↕ INITIAL ADJUST
>> RMNG INK SNSOR ADJ
↕ POST-REPLAC ADJ
>>> POST-REPLAC ADJ
↕ CC A: X.XX B: Y.YY
CC: Ink color
>>> POST-REPLAC ADJ
OK?
Chapter 7 Adjustment
STAY-BASE-UP
◎
◎
◎
◎
◎
7-35