Oki IP-6620 Maintenance Manual page 323

(1) Panel indication with the firmware updated successfully
When the online update completes successfully, the message below appears
Online update has completed.
UPGRADE FINISHED
RESTART
After the online update, restart the printer.
The printer is restarting...
Booting up...
F/W Ver. X.XX_XX
* With the firmware version, X. XX_XX on the message, check that the firmware has been
updated correctly.
The printer is initializing...
INITIALIZING...
PLEASE WAIT
The printer has restarted.
PRINTER READY
01: PAPER/1626mm
(2) Panel indication with an error detected
If an error occurs while updating the firmware, the message below appears.
An error has occurred.
UPDATE FAILED
RESTART PRINTER
XXXX: Error code
5-164
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
XXXX