Oki IP-6620 Maintenance Manual page 518

< Verification procedure >
Notes
 The adjustment explained here is not necessary when replacing the LINEAR ENCODER
ASSY(MW) as shown in 6.8.6 .
 Both the horizontal and vertical positions must be checked after adjustment even if only one of
the horizontal or vertical positions has been adjusted.
 The linear encoder positions (horizontal and vertical) should be adjusted only once at a time.
[Horizontal adjustment]
1.
Move the carriage manually to the
maintenance area.
2.
Loosen the screw securing the
BRACKET-ENCODER-S, and adjust the
position by moving the
BRACKET-ENCODER-S forward and
backward.
Adjust the linear encoder position so that
the T fence comes at the center of the
linear encoder space.
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 7 Adjustment
BRACKET-ENCODER-S
7-43