OPEN INK BOX COVER
The following message is displayed when the ink cartridges are installed to the main tank. In this
case, close the ink box cover.
* If the ink cartridges are not installed, install them.
CLOSE INK BOX COVER
Press the OK button to start priming the system.
START FILLING
BOTTLE IS EMPTY?
The pump stops running.
Remove the jig SINGLE COLOR FILLING TOOL(MV) and press the OK button.
REMOVE
INK SUCTION TOOL
Check that a waste ink bottle is installed and press the OK button.
START PH RECOVERY
BOTTLE IS EMPTY?
A normal cleaning is performed.
PH RECOVERING
REQUIRED TIME
Chapter 3 Maintenance Mode Functions and Operations
◎
◎
◎
XXXXXXX
Y:YY
OKI Data Infotech Corporation CONFIDENTIAL
3-71