<Post procedure operation>
1.
Install the cap cover.
Clean the wiper sponge, the metal plates,
and other parts.
<Note>
Follow the procedure below to check or enter a single color adjustment value.
(Display at the end of the single color adjustment.)
1.
Press the CANCEL button.
2.
With the Up and Down buttons, select 1
COLOR ADJ VAL, then press the OK
button.
3.
With the Up and Down buttons, select a
single color adjustment value.
7-26
OKI Data Infotech Corporation CONFIDENTIAL
>>>ADJUST FOR 1 COLOR
Lc
>>WIPING POS ADJUST
ADJUST FOR 1 COLOR
>>WIPER POS ADJUST
1 COLOR ADJ VAL
>>>1 COLOR ADJ VAL
CC:±XX
Chapter 7 Adjustment
◎
◎
◎
◎