Oki IP-6620 Maintenance Manual page 268

5.5.29 System Error 230X: Suction Fan Error
<Description>
The suction fan is not rotating.
X
0
1
2
3
<Faulty part>
(1) FAN4 (suction fan)
(2) PCB-ASSY-ACT3
(3) CABLE(SFAN)-ASSY(MW)
<Action>
Check the Items to be Checked on the table below, and perform the actions starting from the top
until the problem is solved.
No
Suction fan's operation
1
Suction fan's harness condition
2
3 Suction fan
4 PCB-ASSY-ACT3
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
Suction fan.
Suction fan 1
Suction fan 2
Suction fan 3
Suction fan 4
Items to be Checked
OKI Data Infotech Corporation CONFIDENTIAL
Unload the media from the printer, turn the printer on, and
enter the maintenance mode.
From the ACTUATORS menu, operate the suction fan motor
causing the error, and check the fan's operating sound.
Check that the harness condition is proper as follows.
- The connectors are connected securely.
- The cable is not disconnected.
- The harness is not pinched by other parts.
- The cable jacket is not damaged.
Replace the suction fan motor causing the error.
Replace the PCB-ASSY-ACT3.
Action
5-109