5.4.11 Some start maintenance operations have not been performed
PERFORM
START MAINTENANCE
<Description>
Some of the start maintenance operations have not been performed.
<Action>
Perform the start maintenance operations that have been omitted.
Meet the conditions to clear the The start maintenance has not been performed warning.
If the warning does not disappear, perform the same actions as in 5.4.1 Cap open warning.
5.4.12 The waste ink bottle is almost full
WASTE INK BOTTLE IS
ALMOST FULL
<Description>
The waste ink quantity exceeds 75% of the bottle capacity.
Since the bottle capacity is 4000 ml, the warning is displayed when the bottle contains more than
3000 ml of waste ink.
If the warning does not disappear, perform the same actions as in 5.4.1 Cap open warning.
<Action>
Replace the waste ink bottle.
Press any button.
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
5-59