Oki IP-6620 Maintenance Manual page 431

10.
Check that the two snap-fits are engaged.
If not, push them with your finger until
they engage.
Correct position: The snap-fit is engaged.
11.
Hook the tabs at the extremity of the
COVER(CAP-F) to the FRAME(UD-HV),
and then secure with the screw.
COVER(CAP-F)
Note
After you have finished replacing the cap, check that there is not leakage when the cap is closed
(see 6.10.1).
6-102
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
Snap-fits
Wrong position: The snap-fit is not engaged.
FRAME(UD-HV)