Oki IP-6620 Maintenance Manual page 211

Warning Cause
The media You have not set
advance the media advance
value has value in the media
not been preset menu after
adjusted. installing the
media, or after
choosing for the
first time a media
preset for a new
media.
The start 20 hours has
maintenanc passed since the
e has not last start
been maintenance
performed. operation.
It is It is recommended
recommend to perform cleaning
ed to (PH recovery) to
perform PH prevent the missing
recovery. dots problem.
The print Automatic cleaning
heads have will be performed
not been when the next
cleaned. printing starts.
Sheet mount One month has
cleaning has passed since the
not been last sheet mount
performed. cleaning.
Some start Some of the start
maintenanc maintenance
e operations operations have
have not not been
been performed.
performed.
The waste The waste ink
ink bottle is quantity exceeds
almost full. 75% of the bottle
capacity.
Since the bottle
capacity is 4000 ml,
the warning is
displayed when the
bottle contains
more than 3000 ml
of waste ink.
Ink is The ink quantity
running low. remaining in the
(CIS model) cartridge reached
45 ml (3% of 1.5 l).
The The ink quantity
reservoir is remaining in the
almost reservoir reached
empty. 250 ml.
(LCIS
model)
The The subscription
subscription code will expire
expiration within one week.
date is
close.
The amount The amount of ink
of ink that that can be used
can be used reached 0.5 l.
is low.
(LCIS
model)
5-52
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
Warning
Panel/LED Display
Sound
None
ADJUST MEDIA
ADVANCE VALUE
None
PERFORM
LAUNCH MAINTENANCE
None
PH RECOVERY
RECOMMENDED
None
PERFORM
PH RECOVERY NOW
None
PERFORM
SHEET MOUNT CLEANING
None
PERFORM
LAUNCH MAINTENANCE
None
WASTE INK BOTTLE IS
ALMOST FULL
None
CC INK IS
RUNNING OUT
CC: Color
None
CC INK IS
RUNNING OUT
CC: Color
None
SUBSCRIPTION LIMIT
XXXX/XX/XX
None
AVAILABLE INK IS
RUNNING OUT
OKI Data Infotech Corporation CONFIDENTIAL
Service Engineer
Inspection
User Solution (For inspection criteria,
see Reference to
Check/Replace Parts.)
Perform automatic - Install the last firmware
adjustment or adjust version.
the media advance - Check the system time.
value manually.
* The warning
disappears even
without registering
the media when
adjusting the media
advance value
manually.
Perform start - Install the last firmware
maintenance. version.
- Check the system time.
Perform PH - Install the last firmware
RECOVERY. version.
- Check the system time.
Perform PH - Install the last firmware
RECOVERY. version.
- Check the system time.
Perform sheet - Install the last firmware
mount cleaning. version.
- Check the system time.
Perform the start - Install the last firmware
maintenance version.
operations that have - Check the system time.
been omitted.
Replace the waste Install the last firmware
ink bottle. version.
Replace the Install the last firmware
corresponding ink version.
cartridge.
Supply ink in the Install the last firmware
reservoir. version.
Enter a new Provide a new
subscription code. subscription code.
Read an ink amount Provide a new
extension chip with subscription code.
the printer.
Reference
Assumed to Check/
Replacement Part Replace
Parts
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100
- Firmware version
- EEPROM
- PCB-ASSY-IPB5-100