Notes for installation
When setting the ink tubes between the projections of TRAY(WI), be sure to make the tube
ends touch the bottom of TRAY(WI).
Install the PUMP-F-ASSY(MW) so that their roller positions roller differ by 90° between them
(see the figures below).
Weight to the top
Weight to the right
With rotating the roller, change the position of the weight visible from the window on the HOLDER(PUMP-F).
After the replacement, check that leak tightness is maintained on the capped status (see
6.10.1).
Chapter 6 Parts Replacement (Disassembly/Reassembly)
Weight to the top
Weight to the right
OKI Data Infotech Corporation CONFIDENTIAL
Weight to the top
Weight to the right
Weight to the right
6-97